| 这个模具给我试压机器的 🇨🇳 | 🇻🇳 Mốc này đã cho tôi một thử nghiệm của máy | ⏯ |
| 这是经过二次净化的水 🇨🇳 | 🇬🇧 This is water that has been purified after a second time | ⏯ |
| 两个模型，这是压花互换了啊 🇨🇳 | 🇬🇧 two models, this is the embossing interchange ah | ⏯ |
| 这次国内到达 🇨🇳 | 🇷🇺 На этот раз внутренний приезд | ⏯ |
| 二次 🇨🇳 | 🇬🇧 Second | ⏯ |
| 再压一次 🇨🇳 | 🇬🇧 Press again | ⏯ |
| 这是我第二次来英国 🇨🇳 | 🇬🇧 This is my second time coming to England | ⏯ |
| 这是我们第二次见面 🇨🇳 | 🇬🇧 This is the second time weve met | ⏯ |
| 这是我第二次来曼谷 🇨🇳 | 🇹🇭 นี่คือการเดินทางครั้งที่สองไปยังกรุงเทพฯ | ⏯ |
| 第一次来，这是第二天 🇨🇳 | 🇰🇷 첫 번째, 이것은 다음 날입니다 | ⏯ |
| 二次堂百合 🇨🇳 | 🇯🇵 二次堂ユリ | ⏯ |
| 这次发现我压死了 🇨🇳 | 🇹🇭 เวลานี้ผมพบว่าผมถูกบดขยี้ตาย | ⏯ |
| 冲压模具工程师 🇨🇳 | 🇬🇧 Stamping mold engineer | ⏯ |
| 这个是压200 🇨🇳 | 🇹🇭 นี่คือความดัน๒๐๐ | ⏯ |
| 这是内销 🇨🇳 | 🇹🇭 นี่คือการขายในประเทศ | ⏯ |
| 昨晚是第二次 🇨🇳 | 🇹🇭 เมื่อคืนนี้เป็นครั้งที่สอง | ⏯ |
| 这是二是黄色的 🇨🇳 | 🇬🇧 This is two yellow | ⏯ |
| 第二次 🇨🇳 | 🇬🇧 Second time | ⏯ |
| 二次元 🇨🇳 | 🇬🇧 Secondary yuan | ⏯ |
| 你这个模具要开一个模具铁的模具要压下去，这个工厂很难搞 🇨🇳 | 🇬🇧 You this mold to open a mold iron mold to press down, this factory is difficult to do | ⏯ |
| Hot runner mold is better, but mold cost is higher 🇨🇳 | 🇬🇧 Hot runner mold is better, but mold cost cost is higher | ⏯ |
| 次要不重要 🇨🇳 | 🇬🇧 Secondary is not important | ⏯ |
| internal 🇨🇳 | 🇬🇧 Internal | ⏯ |
| across mold 🇨🇳 | 🇬🇧 Across- | ⏯ |
| 二手房 🇨🇳 | 🇬🇧 Secondary | ⏯ |
| 中等 🇨🇳 | 🇬🇧 secondary | ⏯ |
| 因为这个是有要有模具才行 🇨🇳 | 🇬🇧 Because this is there to have a mold to do | ⏯ |
| 内部 🇨🇳 | 🇬🇧 Internal | ⏯ |
| 要一个模具的时候，没有这条线，行不行 🇨🇳 | 🇬🇧 Want a mold, without this line, ok | ⏯ |
| 因为SB一个模具小头一个模具 🇨🇳 | 🇬🇧 Because SB a mold small head a mold | ⏯ |
| 按这个穴位有点痛，按完以后会很舒服的 🇨🇳 | 🇬🇧 Press this point a little pain, press after the very comfortable | ⏯ |
| 喜达现在开的是这一块模具吗这个 🇨🇳 | 🇬🇧 Is Star now driving this piece of mold | ⏯ |
| 群主，这一个内部会议 🇨🇳 | 🇬🇧 Group master, this one internal meeting | ⏯ |
| 我是一名中专生 🇨🇳 | 🇬🇧 Im a secondary school student | ⏯ |
| 我的建议是ussb一个模具 🇨🇳 | 🇬🇧 My suggestion is to ussb a mold | ⏯ |
| 这个衣服大我们按起来好按一点，这个质量很好 🇨🇳 | 🇬🇧 This dress is big we press up a little bit, this quality is very good | ⏯ |
| 是拉杆箱外壳成型的模具 🇨🇳 | 🇬🇧 Its a mold mold mold formed in the rod case shell | ⏯ |
| 二次元 🇨🇳 | 🇬🇧 Secondary yuan | ⏯ |